MMI DOOR Severe Weather 32-in x 80-in x 4-9/16-in Fiberglass Full lite Right-hand outswing Primed Primed Prehung Single door Front Door with Brickmould Insulating core with Blinds

Description

MMI DOOR Severe Weather Fiberglass Smooth Front Doors are built to last and can add substantial curb appeal to your home. This Severe Weather Fiberglass Smooth front door comes with our MSystem 2-year warranty on the Door Component and the Base Prehung System as well as a 10-year warranty on the Impact Glass lite. All of our severe weather fiberglass smooth front doors are virtually maintenance free and will not warp, rot, dent or split. Our prehung door unit seals out the weather and practically eliminates air and water infiltration all together. MMI Door Severe Weather Fiberglass Doors meet ASTM E1886 and E1996 test standards. All openings comply with specific design pressure (DP) ratings in accordance to ASTM E330. Common door size is 32-in x 80-in. Unit dimension is 33.5-in x 81-in. The suggested rough opening is 34-in x 81.5-in. This unit comes with a 4-9/16-in wide primed composite frame.

• Fiberglass reinforced skin with insulated polyurethane core

• Common door size is 32-in x 80-in

• Overall unit dimension is 33.5-in x 81-in

• Suggested rough opening is 34-in x 81.5-in

• Prehung on a 4-9/16-in primed composite frame with matching brickmould attached

• The prehung unit comes with 3 satin nickel unremovable pin hinges, compression weatherstrip and composite non-adjustable sill

• Internal white blinds are encased in clear, tempered Low-E glass

• When viewed from the exterior of the home, a right-hand/outswing has the hinges on the left, the knob on the right and swings out from the home

• Severe weather door is certified for use in a range of entrance systems to meet Florida and Texas wind-borne requirements in areas where wind speeds can exceed 180 MPH, severe weather door meets DP65 wind and missile impact code requirements #65279;

Dimensions GuidePDF

Operating ManualPDF

Use and Care ManualPDF

Instructions/AssemblyPDF

Installation ManualPDF

Warranty GuidePDF

MMI DOOR Severe Weather Fiberglass Smooth Front Doors are built to last and can add substantial curb appeal to your home. This Severe Weather Fiberglass Smooth front door comes with our MSystem 2-year warranty on the Door Component and the Base Prehung System as well as a 10-year warranty on the Impact Glass lite. All of our severe weather fiberglass smooth front doors are virtually maintenance free and will not warp, rot, dent or split. Our prehung door unit seals out the weather and practically eliminates air and water infiltration all together. MMI Door Severe Weather Fiberglass Doors meet ASTM E1886 and E1996 test standards. All openings comply with specific design pressure (DP) ratings in accordance to ASTM E330. Common door size is 32-in x 80-in. Unit dimension is 33.5-in x 81-in. The suggested rough opening is 34-in x 81.5-in. This unit comes with a 4-9/16-in wide primed composite frame.

• Fiberglass reinforced skin with insulated polyurethane core

• Common door size is 32-in x 80-in

• Overall unit dimension is 33.5-in x 81-in

• Suggested rough opening is 34-in x 81.5-in

• Prehung on a 4-9/16-in primed composite frame with matching brickmould attached

• The prehung unit comes with 3 satin nickel unremovable pin hinges, compression weatherstrip and composite non-adjustable sill

• Internal white blinds are encased in clear, tempered Low-E glass

• When viewed from the exterior of the home, a right-hand/outswing has the hinges on the left, the knob on the right and swings out from the home

• Severe weather door is certified for use in a range of entrance systems to meet Florida and Texas wind-borne requirements in areas where wind speeds can exceed 180 MPH, severe weather door meets DP65 wind and missile impact code requirements #65279;

Dimensions GuidePDF

Operating ManualPDF

Use and Care ManualPDF

Instructions/AssemblyPDF

Installation ManualPDF

Warranty GuidePDF